View TLRMHGH48M_4124900.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLRMHGH48M(F)
TOSHIBA LED LAMP InGaAlP RED/GREEN LIGHT EMISSION
TLRMHGH48M(F)
BI-COLOR HIGH LUMINOSITY INDICATOR
Includes protruded resin.
Unit: mm
* * * * * *
Lead(Pb) free(Sn-Ag-Cu) High Luminous Intensity. 5mm package InGaAlP Red/Green LED, the cathode is common to two colors. All plastic mold type. Milky white, diffusion lens.
Absolute Maximum Ratings (Ta = 25C)
CHARACTERISTICS FORWARD CURRENT REVERSE VOLTAGE POWER DISSIPATION OPERATING TEMPERATURE SYMBOL IF VR Topr Tstg RATING 50 (Note) 4 -40~100 -40~120 UNIT mA V C C
Stopper
Anode(Red) Note: Using continuously under heavy loads (e.g. the application of high Common Cathode temperature/current/voltage and the significant change in Anode(Green) temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. JEDEC Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling JEITA Precautions"/"Derating Concept and Methods") and individual TOSHIBA 4-5AR1 reliability data (i.e. reliability test report and estimated failure rate, etc). Weight: 0.37 g (typ.) Note1:Maximum rating of "forward current - atmospheric temperature (i.e. IF-Ta graph in the next page)" is for each component. In case two components lightening, total current should be within the rating.
PRECAUTIONS
Please be careful of the followings * Soldering temperature : 260 max Soldering time :3 s max (Soldering portion of lead : below the lead stopper of the device ) * If the lead is formed, the lead should be formed up to below the lead stopper of the device without Formed stress to the resin. Soldering should be performed after lead forming. * The visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light.
ELECTRICAL AND OPTICAL CHARACTERISTICS (Ta = 25C)
CHARACTERISTICS FORWARD VOLTAGE Red Green Red Green Red Green Red Green Red Green SYMBOL VF TEST CONDITION IF = 20mA MIN 272 153 TYP 1.95 2.05 450 220 13 13 626 571 MAX 2.4 2.4 50 50 UNIT V
REVERSE CURRENT
IR
VR = 4V
uA
LUMINOUS INTENSITY
IV
IF = 20mA
mcd
SPECTRAL LINE HALF WIDTH
IF = 20mA
nm
DOMINANT WAVELENGTH
d
IF = 20mA
nm
1
2007-10-01
TLRMHGH48M(F)
IF - V F
100 Ta = 25C Ta = 25C Green 50 30
IV - IF
(mA)
IV (mcd)
Red
3000 1000 500 300 100 50 30 1 3 5 10 30 50 100 Red Green
Forward current
IF
10
5 3
1 1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
Luminous intensity
Forward voltage
VF
(V)
Forward Current
IF
(mA)
IV - Tc
3 1.0
Relative luminous intensity - Wavelength
IF = 20 mA Ta = 25C 0.8 Green 0.6 Red
IV
Relative luminous intensity
1
0.5 0.3
Relative luminous intensity
0.4
0.2
0.1
-20
0
20
40
60
80
0 520
540
560
580
600
620
640
660
680
700
Case temperature
Tc
(C)
Wavelength
(nm)
Radiation pattern
80
IF - Ta
Ta = 25C
(mA) Allowable forward current IF
Red Green
40 20 0 0 60
20
40
60
80
100
120
Ambient temperature
Ta
(C)
2
2007-10-01
TLRMHGH48M(F)
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
3
2007-10-01

▲Up To Search▲

Price & Availability of TLRMHGH48M

	To Download TLRMHGH48M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .